series 700 elevator strip-line sockets with bifurcated contacts note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. features: ? for elevated mounting of lcds and other odd-centered or high pin count components. ? any height from .360 to 2.000 [9.14 to 50.80]. ?optional spacer available for mounting on .300 [7.62], .600 [15.24], .900 [22.86], 1.100 [27.94], and 1.300 [33.02] centers. consult factory for other sizes. specifications: ? body is black ul 94-v0 glass-filled 4/6 nylon. ? pin is grade a phosphor bronze per qq-b-750. ? optional spacer is fr-406, .032 [.81] thick. ? pin plating is 11 = 10 [.25 m] min. gold per mil-g-45204 over 50 [1.27 m] min. nickel per sae-ams-qq-n-290. 10 = 200 ? min. matte tin per astm b545-97 over 50 ? min nickel per sae-ams-qq-n-290. 10tl = 200 ? min. 90/10 tin/lead per mil-t-10727 type 1 over 50 ? min nickel per sae-ams-qq-n-290. ? current rating=1.5 amp. ? operating temperature= -67f to 221f [-55c to 105c] tin & tin/lead plating, = -67f to 257f [-55c to 125c] gold. ? insertion force=110 grams/pin average; withdrawal force=75 grams/pin average. ? accepts flat leads up to .014 x .020 wide [.36-.51], round leads up to .020 [.51] in diameter. ? socket accepts lead lengths from seating plane .080-.160 [2.03-4.06]. mounting considerations: ? suggested pcb hole size=.045 .002 [.1.14 .05] dia. xx-7xxxx-1xxx ordering informa tion no. of pins (see table) series elevated height: .360-2.000 [9.14-50.80] plating: 0 = tin 0tl = tin/lead 1 = gold solder tail pin ordering informa tion (for spacer bar) series center-to-center mounting desired (?c? dimension) 0500-x.xxx other sizes available. consult factory. no. of pins no. of grooves 20 2 25 2 30 2 34 3 40 2 cont act det ail spacer bar a ll dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified ?a?=(no. of pins x .100 [2.54]) + .050 [1.27] ?b?=(no. of pins per row - 1) x .100 [2.54] 12010 rev.e printouts of this document may be out of date and should be considered uncontrolled pins may be supplied with cut ends north america frenchtown, nj usa tel: (908) 996-6841 fax:(908) 996-3891 europe tel: +44 870 240 0249 fax: +44 871 919 6033 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com abc
|
